StickyMat System


Home / Electric Systems / StickyMat System

How to test my underfloor heating?

 

To test your underfloor heating you will need a multi-meter with a range from 0-20K ohms for testing.

The resistance of each heater should be tested to establish if you have a circuit.

You should carry out the following tests and should expect the results below:

Live to Neutral – should give you the ohms value listed in the manual for the heater(s) installed within 5%.

Live to earth  & Neutral to earth – infinity

If you do not get a ohms reading(open circuit ) or you get a reading across Live/Neutral – Earth, Contact Warmup support for further assistance.